MDX V6-3.7L (2007)
release the clips (B), then remove the seat cushion cover.
8. Install the seat-back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks, hook
strips, and clips.
-
Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
-
Replace the wire ties you removed with new ones.
-
With seat heater: Make sure the seat-back heater connector is plugged in properly.