MDX V6-3.7L (2007)
Parking Brake Shoe: Removal and Replacement
Parking Brake Shoe Replacement
CAUTION: Frequent inhalation of brake pad dust, regardless of material composition, could be hazardous to your health.
^
Avoid breathing dust particles.
^
Never use an air hose or brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner.
Disassembly
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
2. Remove the rear wheels.
3. Release the parking brake, and remove the following items:
^
Rear brake caliper bracket.
^
Rear brake disc/drum.
4. Disconnect and remove the upper return springs (A).
5. Remove the tension pins (A) by pushing the respective retainer (B) and turning the pin.
6. Remove the strut (A).
7. Lower the parking brake shoe assembly.
8. Remove the forward brake shoe (A) and the adjuster assembly (B) by removing the lower return spring (C).
