MDX V6-3.7L (2007)
9. Remove the rearward brake shoe by disconnecting the parking brake cable (A) from the parking brake lever (B).
10. Remove the U-clip (A), wave washer (B), and parking brake lever (C) from the brake shoe (D).
Reassembly
1. Apply Molykote Plastilube # 2 grease to the sliding surface of the pivot pin (A) of the rearward brake shoe (B).
2. Install the parking brake lever (C) and wave washer (D) on the pivot pin, and secure with a new U-clip
^
Install the wave washer with its convex side facing out.
^
Pinch the U-clip securely to prevent the parking brake lever from coming off the brake shoe.
