MDX V6-3.7L (2007)
34. Grease the lip of the oil seal, and apply oil to the new O-ring (A).
35. Install the dowel pins (B), then align the inner rotor with the crankshaft, and install the oil pump (C).
36. Clean the excess grease off the crankshaft, and check the seat for distortion.
37. Install the baffle plate (D), then install the oil screen (E) with new O-ring (F).
38. Install the rocker arm oil control solenoid/oil filter assembly (A), with a new rocker arm oil control solenoid filter (B).
39. Install the oil pan.
40. Install the crankshaft position (CKP) sensor.
41. Install the cylinder heads.
42. Install the drive plate.
43. Install the transmission.
44. Install the engine assembly.
