MDX V6-3.7L (2007)
8. Tighten the harness holder mounting bolts (A) and the power steering hose bracket mounting bolt (B).
9. Install the engine ground cable (C) and breather hose (D).
10. Connect the three injector connectors.
11. Tighten the two bolts (A) securing the harness holder, and connect the engine coolant temperature (ECT) sensor 1 connector (B), exhaust gas
recirculation (EGR) valve connector (C), front secondary heated oxygen sensor (secondary H02S) connector (D) and front air fuel ratio (A/F)
sensor connector (E).
12. Install the dipstick.
13. Install the six ignition coils.
14. Install the intake manifold.
