MDX V6-3.7L (2007)
Air Door Actuator / Motor: Service and Repair
Rear Air Mix Control Motor Replacement
Rear Air Mix Control Motor Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
1. Remove the center console.
2. Disconnect the 7P connector (A) from the rear air mix control motor (B). Remove the self-tapping screws and the rear air mix control motor from
the HVAC unit.
3. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make
sure the motor runs smoothly.