acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Combination Switch:|07-002|Page 12595 > < Customer Interest for Combination Switch:|07-002|Page 12592
Page 1
background image

Combination Switch: All Technical Service Bulletins
Steering - Clicking Noise When Turning Steering Wheel

07-002

January 16, 2007

Applies To: 
2007 MDX- From VIN 2HNYD....7H500001 thru 2HNYD....7H502196

Clicking When Turning the Steering Wheel

SYMPTOM

You hear a clicking sound when turning the steering wheel to the left or to the right.

PROBABLE CAUSE

The combination switch assembly is misaligned.

CORRECTIVE ACTION

Realign the combination switch assembly.

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

5103A1

Flat Rate Time:

0.7 hour

Failed Part:

P/N 35251-STX-A01

Defect Code:

07406

Symptom Code:

04201

Template ID:

07-002A

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

NOTE

SRS components are located in the steering wheel and column. Review the SRS component locations and the precautions and procedures before
doing this repair.

1.

With the key still in the ignition switch, adjust the steering wheel to the lowest position, and pull/ telescope it all the way out. Remove the ignition
key.

2.

Remove the steering wheel:

^

Refer to page 17-22 of the 2007 MDX Service Manual or

^

Online, enter keyword STEER, and select
Steering Wheel Removal from the list.

NOTE:

Always use a steering wheel puller to avoid damaging the steering wheel.

All Technical Service Bulletins for Combination Switch:|07-002|Page 12595 > < Customer Interest for Combination Switch:|07-002|Page 12592