MDX V6-3.7L (2007)
6.
Hold the combination switch while tightening the three screws securing the combination switch in the following order: screw # 1, screw # 2, and
then screw # 3.
7.
Temporarily install the steering wheel, and confirm that the noise is gone. If needed, readjust the combination switch. Remove the steering wheel.
8.
Reinstall the upper and lower steering column covers:
^
Refer to page 17-25 of the service manual, or
^
Online, enter keyword STEER, and select Steering Column Cover Removal/Installation from the list.
9.
Reinstall the steering wheel:
^
Refer to page 17-24 of the service manual, or
^
Online, enter keyword STEER, and select Steering Wheel Installation from the list.
10.
Do the steering column position memorization:
^
Refer to page 17-28 of the service manual, or
^
Online, enter keyword STEER, and select Steering Column Position Memorization from the list.
Disclaimer
