MDX V6-3.7L (2007)
Fluid - A/T: Service and Repair
ATF Replacement
ATF Replacement
NOTE: Keep all foreign particles out of the transmission.
1. Park the vehicle on the level ground.
2. Warm up the engine to normal operating temperature (the radiator fan comes on) and turn the engine off.
3. Raise the vehicle up on a lift, or apply the parking brake, block both rear wheels, and raise the front of the vehicle. Make sure it is securely
supported.
4. Remove the transmission undercover.
5. Remove the ATF filler bolt and drain plug (A) and drain the automatic transmission fluid (ATF)
NOTE: If a cooler cleaning is done, refer to ATF Cooler Cleaning.
6. Reinstall the drain plug with a new sealing washer (B).
7. Refill the transmission with the recommended fluid into the filler hole (A). Always use Acura ATF-Z1 Automatic Transmission Fluid (ATF).
Using a non-Acura ATF can affect shift quality.
