MDX V6-3.7L (2007)
8. Refill the transfer assembly with the recommended fluid (hypoid gear oil) through the filler hole (C) until the fluid flows out. Use an SAE 90 or
SAE 80W-90 viscosity hypoid gear oil, API classified GL4 or GL5 only.
Viscosity:
SAE 90: Above 0°F (-18°C)
SAE 80W-90: Below 0°F (-18°C)
Transfer Fluid (Hypoid Gear Oil) Capacity:
0.43 L (0.45 US qt) at fluid change
9. Install the filler plug with a new sealing washer.
10. Install the transmission undercover.
