MDX V6-3.7L (2007)
26. Measure voltage between DLC terminals No. 4 and No. 16.
Is there battery voltage?
YES - Go to step 27.
NO - Repair open in the wire between DLC terminal No. 4 and G503.
27. Connect the HDS to the DLC.
28. Jump the SCS line with the HDS.
29. Disconnect PCM connector A (49P).
30. Disconnect the HDS from the DLC.
31. Connect DLC terminal No. 6 to body ground with a jumper wire.
32. Check for continuity between PCM connector terminal A48 and body ground.
Is there continuity?
YES - Go to step 33.
NO - Repair open in the wire between the PCM (A48) and DLC terminal No. 6.
33. Connect DLC terminal No. 14 to body ground with a jumper wire.
