MDX V6-3.7L (2007)
Does continuity go away when one of the above components is disconnected?
YES - Replace the part that caused an open when it was disconnected.
NO - Repair short in the wire between the PCM (B36) and the MAP sensor, the output shaft (countershaft) speed sensor.
67. Check for continuity between PCM connector terminal C12 and body ground.
Is there continuity?
YES - Go to step 68.
NO - Go to step 69.
68. Continue to check for continuity between PCM connector terminal C12 and body ground, while disconnecting these parts, one at a time:
-
EGR valve 6P connector
-
Input shaft (mainshaft) speed sensor 3P connector
Does continuity go away when one of the above components is disconnected?
YES - Replace the part that caused an open when it was disconnected.
NO - Repair short in the wire between the PCM (C12) and the EGR valve or the input shaft (mainshaft) speed sensor.
69. Check for continuity between PCM connector terminal A24 and body ground.
Is there continuity?
YES - Go to step 70.
NO - Go to step 71.
70. Continue to check for continuity between PCM connector terminal A24 and body ground, while disconnecting the APP sensor 6P connector.
Is there continuity?
YES - Repair short in the wire between the PCM (A24) and APP sensor A.