MDX V6-3.7L (2007)
NO - Replace the accelerator pedal module.
71. Check for continuity between PCM connector terminal A25 and body ground.
Is there continuity?
YES - Go to step 72.
NO - Go to step 73.
72. Continue to check for continuity between PCM connector terminal A25 and body ground, while disconnecting these connectors one at a time.
-
APP sensor 6P connector
-
FTP sensor 3P connector
Does continuity go away when one of the above components is disconnected?
YES - Replace the part that caused an open when it was disconnected.
NO - Repair short in the wire between the PCM (A25) and the APP sensor B or the FTP sensor.
73. Check for continuity between PCM connector terminal B18 and body ground.
Is there continuity?
YES - Go to step 74.
NO - Go to step 75.
74. Continue to check for continuity between PCM connector terminal B18 and body ground, while disconnecting the throttle body 6P connector.
Is there continuity?
YES - Repair short in the wire between the PCM (B18) and the throttle body.
NO - Replace the throttle body.