MDX V6-3.7L (2007)
Information Bus: Component Tests and General Diagnostics
Rear MICU Input Test
Rear MICU Input Test
NOTE: Before testing, troubleshoot the B-CAN System Diagnosis Test Mode A.
1. Turn the ignition switch OFF.
2. Remove the left rear trim.
3. Disconnect the rear fuse/relay box connectors B (34P) and C (42P).
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
-
If the terminals look OK, go to step 5.
5. With the connectors still disconnected, make these input tests at the connectors.