MDX V6-3.7L (2007)
Fuel Tank Unit: Service and Repair
Fuel Tank Unit Removal/Installation
Fuel Tank Unit Removal/Installation
Special Tools Required
Fuel sender wrench 07AAA-S0XA100
Removal
1. Relieve the fuel pressure.
2. Remove the fuel fill cap.
3. Remove the second row seat.
4. Remove the access panel (A) from the floor.
5. Disconnect the fuel tank unit 4P connector (B).
6. Disconnect the quick-connect fittings (C) from the fuel tank unit.
7. Using the fuel sender wrench, loosen the locknut (A).