MDX V6-3.7L (2007)
Clockspring Assembly / Spiral Cable: Service and Repair
Cable Reel Replacement
Removal
1. Make sure the front wheels are aligned straight ahead.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes.
3. Remove the driver's airbag.
4. Disconnect the connector (A) from the cable reel, then remove the steering wheel bolt (B).
5. Confirm that the front wheels point straight ahead, then remove the steering wheel with a steering wheel puller. Do not tap on the steering wheel or
steering column shaft when removing the steering wheel.
6. Remove the column cover screws (A), then remove the column covers (B, C).
