MDX V6-3.7L (2007)
1. Detach the clips and remove the seat belt cover (A).
2. Remove the headliner.
3. Remove the upper anchor mounting bolt (A) and upper anchor bolts (B), then remove the upper anchor (C).
4. Remove the retractor mounting bolt (A) and retractor bolt (B), then remove the retractor (C).
5. Install the center second row seat belt and retractor in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Apply medium strength type liquid thread lock to the anchor bolts before reinstallation.
-
Check that the retractor locking mechanism functions.
-
Before installing the upper anchor bolt, make sure there are no twists or kinks in the seat belt.
