MDX V6-3.7L (2007)
2. Release the pressure from the strut spring compressor, then disassemble the damper as shown in the Exploded View.
Inspection
1. Reassemble all parts, except for the upper spring mounting cushion, the bump stop, and the damper spring.
2. Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper
should extend smoothly and constantly when compression is released. If it does not, the gas is leaking and the damper should be replaced.
3. Check for oil leaks, abnormal noises, and binding during these tests.
Reassembly
1. Install the damper spring (A) on the upper spring mounting cushion (B) then align the upper end (C) of the damper spring with the cushion stop
(D) or the cushion end (E).