MDX V6-3.7L (2007)
8. Install the trailing arm in the reverse order of removal, and note these items:
^
First install all the suspension components, and lightly tighten the bolts and nuts, then place a floor jack under the lower arm, and raise the
suspension to load it with the vehicle's weight before fully tightening the bolts and nuts to the specified torque values.
^
Before installing the brake disc/drum, clean the mating surface of the hub bearing unit and the inside of the brake disc/drum.
^
Before installing the wheel, clean the mating surface of the brake disc/drum and the inside of the wheel.
^
Fill the master cylinder reservoir to the MAX (upper) level line, and bleed the brake system. Check for a leak at the brake line to the brake
hose, and retighten it if necessary.
^
Check the wheel alignment, and adjust it if necessary.
