MDX V6-3.7L (2007)
Trailing Arm: Service and Repair
Trailing Arm Removal/Installation
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
2. Remove the rear wheel.
3. Remove the parking brake cable (A) from the trailing arm (B).
4. Disconnect the brake line (C) from the brake hose (D) then remove the retaining clip (E).
5. Disconnect the parking brake cable from the parking brake lever.
6. Remove the flange nuts (A) from the trailing arm (B).
NOTE: Use new flange nuts during reassembly.
7. Remove the flange bolts (A) from the trailing arm, then remove the trailing arm.
NOTE: Use new flange bolts during reassembly.
