MDX V6-3.7L (2007)
Shifter A/T: Removal and Replacement
Shift Lever Boot and A/T Gear Position Indicator Panel Replacement
Shift Lever Boot and A/T Gear Position Indicator Panel Replacement
1. Remove the shift lever.
2. Grasp the shift lever boot ring, and slip it out of the shift lever knob cover.
3. Remove the screws (A), and remove the shift lever knob (B).
4. Remove the A/T gear position indicator panel light socket from the indicator panel, and remove the indicator panel from the shift lever bracket
base.
5. Release the lock tabs retaining the shift lever boot using a screwdriver.
6. Replace the shift lever boot or A/T gear position indicator panel, and install the boot in the indicator panel.