MDX V6-3.7L (2007)
31. Install the 8 x 12 mm dowel pins (A) the rear differential right side case (B) the rear differential left side case (C) and the mounting bolts (D).
32. Tighten the mounting bolts in a crisscross pattern in several steps.
33. Install the differential fluid temperature sensor cover (A) rear differential fluid temperature sensor (B) new O-ring (C) and rear differential harness
bracket (D).
34. Install the rear differential front mounting brackets (A) from the rear differential (B).
NOTE: Install a lower surface of the guide (C) horizontally as shown, then tighten the rear differential front mounting bracket bolts (D).