MDX V6-3471cc 3.5L (2002)
2002 MDX: From VIN 2HNYD1...2H500001 thru 2HNYD1...2H523465
2002 MDX: From VIN 2HNYD1...2H532575 thru 2HNYD1...2H543293
1.
Raise the vehicle on a hoist, and remove the front wheels.
2.
Remove the wheel sensor harness bracket from the damper. Do not disconnect the wheel sensor connector.
3.
Remove the brake hose bracket from the damper. Do not disconnect the brake hose.
4.
Disconnect the stabilizer link from the damper.
5.
Position a floor jack under the front lower arm of the damper. Raise the floor jack to support the arm.
6.
Remove the service caps from the upper portion of the damper cover.
7.
Remove the three flange nuts from the damper, and lower the damper assembly with the floor jack.
8.
Clean the surface of the upper damper mounting base with isopropyl alcohol.
