MDX V6-3471cc 3.5L (2002)
Front Door Latch: Service and Repair
Front Door Latch Replacement
NOTE: Put on gloves to protect your hands.
1. Raise the glass fully.
2. Remove these items:
-
Door panel
-
Plastic cover, as necessary
-
Outer handle
3. Detach the inner handle rod (A), and disconnect the actuator connectors (B).
4. Remove the screws, then remove the latch (C) through the hole in the door. Take care not to bend the outer handle rod (D), cylinder rod (E), lock
rod (F), and inner handle rod (A).
5. Install the latch in the reverse order of removal, and note these items:
-
Make sure the actuator connectors are plugged in properly, and each rod is connected securely.
-
Make sure the door locks and opens properly.