MDX V6-3471cc 3.5L (2002)
Front Door Panel: Service and Repair
Front Door Panel Removal/Installation
Special Tools Required
Trim pad remover. Snap-on A177A or equivalent, commercially available.
1. Remove the mirror mount cover. Take care not to scratch the door panel.
2. Remove the inner handle (A). Take care not to scratch the door panel.
1. Pry out the cap (B), and remove the screw (C).
2. Pull the inner handle forward and out half-way.
3. Disconnect the inner handle rod (D) and power door lock switch connector (E). For some models on driver's side, disconnect the driving
position memory switch connector (F).
3. Detach the clips (A) and hooks (B), then remove the speaker grille (C). Remove the screws (D).