MDX V6-3471cc 3.5L (2002)
4. Detach the clips (A) and release the hooks (B), then remove the switch panel (C). Take care not to scratch the door panel. Disconnect the power
window switch (door multi-plex control unit) connectors (D). On driver's side, disconnect the power mirror switch connector (E).
5. Pry out the cap (F), and remove the screw (G).
6. Release the clips that hold the door panel (A) with a commercially available trim pad remover (B), then remove the door panel by pulling it
upward. Disconnect the speaker connector (C). On driver's side, disconnect the front door sub-harness connector (D). On passenger's side,
disconnect the courtesy light bulb socket (E), and detach the harness clip (F) from the panel. Remove the door panel with as little bending as
possible to avoid creasing or breaking it.
7. Install the door panel in the reverse order of removal, and note these items:
