MDX V6-3471cc 3.5L (2002)
Trim Panel: Service and Repair
Trim Removal/Installation - Rear Side Upper Area
Trim Removal/Installation - Rear Side Upper Area
NOTE:
-
Put on gloves to protect your hands.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
-
Take care not to bend or scratch the trim and panels.
Remove the trim as shown. To remove the C-pillar trim, pull the upper portion of the rear side trim panel back as necessary.
Install the trim in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Apply liquid thread lock to the second and third row seat belt upper anchor bolts before installation.
-
Before installing the anchor bolts, make sure there are not twists or kinks in the belts.