acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Power Mirror Position Switch/Sensor|Description and Operation|Page 10072 > < Power Mirror Position Switch/Sensor|Description and Operation|Page 10070
Page 3
background image

Does right mirror swing left [or tilt down] ? 

YES - Go to step 12.

NO - Check the power mirror actuator. If the mirror is OK, repair the open in the LT GRN or YEL/WHT [or BLU/WHT] wires.

12. Apply battery power to the B16 terminal and ground the B15 [or B17] terminal.

Does left mirror swing left [or tilt down] ? 

YES - Go to step 13.

NO - Check the power mirror actuator. If the mirror is OK, repair the open in the BLU/ORN or BLU/GRN [or BRN] wires.

13. Reconnect the 22P connector B to the passenger's multiplex control unit.
14. Turn the ignition switch ON (II)

15. Check for voltage between the B8 and B22 terminals.

Is there about 5 V?

YES - Go to step 16.

NO - Repair open or short in the RED/BLK wire. If the wire is OK, replace the passenger's multiplex control unit.

16. Check for voltage between the B8 and B19 terminals.

Is there about 5 V?

Power Mirror Position Switch/Sensor|Description and Operation|Page 10072 > < Power Mirror Position Switch/Sensor|Description and Operation|Page 10070