MDX V6-3471cc 3.5L (2002)
YES - Go to step 17.
NO - Repair open or short in the BRN/WHT wire. If the wire is OK, the power mirror position sensor is faulty; replace the power mirror actuator.
17. Check for voltage between the B7 and B19 terminals while moving the passenger's mirror from right to left.
Does the voltage change from about 3 V to 1 V?
YES - Go to step 18.
NO - Repair open or short in the GRN wire. If the wire is OK, the right power mirror position sensor is faulty; replace the right power mirror
actuator.
18. Check for voltage between the B10 and B19 terminals while moving the passenger's mirror from up to down.
Does the voltage change from about 1 V to 3 V?
YES - Go to step 19.
NO - Repair open or short in the GRN/RED wire. If the wire is OK, the right power mirror position sensor is faulty; replace the right power mirror
actuator.
19. Check for voltage between the B18 and B19 terminals while moving the driver's mirror from left to right.
Does the voltage change from about 3 V to 1 V?
YES - Go to step 20.
NO - Repair open or short in the GRN/WHT wire. If the wire is OK, the left power mirror position sensor is faulty; replace the left power mirror
