MDX V6-3471cc 3.5L (2002)
Seat Cover: Service and Repair
Front Seat Cover
Front Seat Cover Replacement
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before performing repairs or service.
NOTE:
-
Seats with airbags are marked "SIDE AIRBAG" on the seat-back. Because the component parts (seat-back cover, cushion, etc.) of seats with and
without airbags are different, make sure you install only the correct replacement parts.
-
Do not repair torn or frayed seat-back covers. If necessary, replace the seat-back cover.
-
Take care not to tear the seams or damage the seat covers.
-
Do not touch the OPDS sensor in the seat-back pad, and keep it away from oils. Oils can corrode the sensor causing it to fail.
-
Put on gloves to protect your hands.
Seat-back Cover
1. Fold the seat-back forward.
2. Remove the headrest.
3. Remove the back panel, driver's 8-way power, passenger's 8-way power, manual.
4. Driver's seat: Remove the clip (A), then remove the lumbar support knob (B).
5. Release the hook strips (A), hooks (B, C), and inside springs (D), then loosen the seat-back cover (E).