MDX V6-3471cc 3.5L (2002)
6. Lift and pull out the release button (A), and remove the screw (B), then remove the headrest guide (C).
7. Pull back the edge of the seat-back cover all the way around. Release the clips (A) from under the seat-back cover (B), and on '01 model, release
the fastener (C) under the seat-back cover, then remove the seat-back cover. '01 model:
8. Install the seat-back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fasteners,
hooks and inside springs.
-
Replace the any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
-
Use only original Acura replacement seat-back covers.
Seat Cushion Cover
