MDX V6-3471cc 3.5L (2002)
1. Remove the front seat.
2. Remove the seat cushion, driver's 8-way power, passenger's 8-way power, manual.
3. Release the clips (A) and hooks (B) from under the seat cushion, then loosen the seat cushion cover (C).
4. Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the seat cushion cover (B).
5. Install the seat cushion cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and
hooks.
-
Replace the any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
