MDX V6-3471cc 3.5L (2002)
4. Lift the seat cushion (A) up. Release all of the hook strips (B, C) from under the seat cushion.
5. Left second row seat: Remove the seat belt buckle pocket then remove the left second row seat belt buckle and center second row seat belt
detachable anchor complete from the seat cushion.
6. Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the seat cushion cover (B).
7. Install the seat cushion cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and
hooks.
-
Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
