MDX V6-3471cc 3.5L (2002)
3. Detach the retainers (A) from both sides of the link (B), and release all of the hook strips (C) from under the seat cushion (D).
4. Pull back the edge of the seat cushion cover (A) all the way around, and release all of the clips (B), then remove the seat cushion cover,
5. Install the seat cushion cover in the reverse order of removal, and note these items:
-
To prevent wrinkles, make sure the material is stretched evenly over the pad before securing all the clips.
-
Replace all of the clips fastening the seat-back cover (A) and pad wire (B) with new ones (C) using commercially available upholstery ring
pliers (D).
