MDX V6-3471cc 3.5L (2002)
Seat Latch Cable: Service and Repair
Third Row Seat-Back Recline Cable
Third Row Seat-back Recline Cable Replacement
NOTE:
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
-
Take care not to bend the cable.
1. Remove the third row seat back recline lever.
2. While holding the lever (A) open, carefully pry out the cover (B) with a flat-tip screwdriver to release the tabs (C), then remove it.
3. Disconnect the recline cable (D).
4. Install the third row seat-back recline cable in the reverse order of removal, and make sure the cable is connected securely.