acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest for Seat Track:|02-025|Page 10442 > < Third Row Seat Access Cable|Page 10436
Page 1
background image

Seat Track: Customer Interest
Interior - Driver's Seat Side to Side Looseness

02-025

October 7, 2002

Applies To: 
2001 MDX - ALL
2002 MDX - From VIN 2HNYD1...2H500001 thru 2HNYD1...2H525662

Side-To-Side Looseness in the Driver's Seat

SYMPTOM

The driver's seat feels loose.

PROBABLE CAUSE

Excessive clearance in the seat base.

CORRECTIVE ACTION

Install shims on the seat base.

PARTS INFORMATION

Shims:

P/N 81599-S84-999
(package of 8 shims)

WARRANTY CLAIM INFORMATION

In warranty: 
The normal warranty applies.

Operation Number:

749002

Flat Rate Time:

0.2 hour

Failed Part:

P/N 81660-S3V-A50

Defect Code:

061

Contention Code:

B99

Skill Level:

Repair Technician

Out of warranty: 
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

Diagnose the type of driver's seat looseness by moving the seat to the midpoint position. The horizontal switch on the side of the seat adjusts the seat
bottom. Pull up or push down on the front of the switch to move the seat bottom's front edge up or down to the midpoint position. Pull up or push down
on the rear of the switch to move the seat bottom's rear edge up or down to the midpoint position.

Sit in the driver's seat, and move from side to side while resting against the seat-back.

^

If the seat moves side to side, go to REPAIR PROCEDURE.

^

If the seat moves other than side to side, continue troubleshooting.

REPAIR PROCEDURE

Customer Interest for Seat Track:|02-025|Page 10442 > < Third Row Seat Access Cable|Page 10436