MDX V6-3471cc 3.5L (2002)
NOTE:
Brake pad replacement and disc resurfacing is not needed to get rid of the clunk.
2.
Apply a thin coat of M-77 assembly paste to the new brake pad shims in these areas:
^
The back of inner shim A and outer shim D.
^
Both sides of inner shim B and outer shim C.
3.
Install the new brake pad shims (four per side) on each rear caliper. Refer to the 2001-02 MDX Service Manual, page 19-17, or the 2003-04 MDX
Service Manual, page 19-19.
Disclaimer