MDX V6-3471cc 3.5L (2002)
-
Online, enter keyword SRS COMPONENT, and select SRS Component Location Index from the list.*
Precautions and Procedures:
-
2001-02 models, see page 23-16 of the 2001-02 MDX Service Manual.
-
2003-06 models, see page 23-18 of the 2003-06 MDX Service Manual.
-
Online, enter keyword PRECAUTION, and select SRS Precautions and Procedures from the list.
1.
Make sure you have the anti-theft codes for the audio and navigation system, then write down the frequencies for the audio presets.
2.
Adjust the driver's seat to its highest position at the front and rear of the seat.
3.
Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
*4.
Remove the driver's power seat:
^
Refer to page 20-77 of the 2001-02 MDX Service Manual.
^
Refer to page 20-91 of the 2003-06 MDX Service Manual.
^
Online, enter keyword SEAT REMOVAL, and select Front Seat Removal and Installation from the list.
5.
Remove the seat riser from the bottom of the seat by removing the four nuts.
^
Refer to page 20-82 of the 2001-02 MDX Service Manual.
^
Refer to page 20-95 of the 2003-06 MDX Service Manual.
^
Online, enter keyword SEAT LINKAGE, and select Front Seat Linkage Disassembly/ Reassembly from the list.*
6.
Remove the front cover (four screws).
7.
Remove the three screws, release the clip, and then remove the center cover.
