MDX V6-3471cc 3.5L (2002)
7. Disconnect the pump outlet hose (A) from the power steering pump, and remove the feed hose clamp (B).
8. Remove the 10 mm flange bolts on the engine side mount bracket (A).
9. Raise the vehicle, and make sure it is securely supported.
10. Remove the front wheels.
11. Remove the cotter pin (A) from the 12 mm nut (B), and loosen the nut.
12. Separate the tie-rod ball joint and knuckle using the special tool.
13. Remove the subframe stiffener plate.
