MDX V6-3471cc 3.5L (2002)
4. Loosely install the two 10 mm flange bolts on the left side of the gearbox.
5. Install the mounting cushion (A) on the right side of the gearbox.
6. Install the mounting bracket (B) over the mounting cushion, then install the two 10 mm flange bolts (C). Tighten the four 10 mm flange bolts for
the gearbox to the specified torque.
7. Connect the return hose (A) securely, and tighten the adjustable hose clamp (B).
8. Connect the feed line (C), and tighten the 14 mm flare nut (D) to the specified torque.