MDX V6-3471cc 3.5L (2002)
9. Install the P/S line mounting brackets (A) on the front subframe and gearbox mounting bracket.
10. Carefully raise the front subframe with the transmission jack (transfer case supporting jack).
11. Install the rear stiffener plates (A). Tighten the 12 mm flange bolts (B) and 14 mm special bolts (C) to specified torque.
12. Install the front stiffener plates (A) with 12 mm flange bolts (B) and 14 mm special bolts (C), and tighten to specified torque.
13. Lower the front subframe supporting jack and the transmission jack.
