MDX V6-3471cc 3.5L (2002)
4. Remove the brake hose bracket mounting bolts (A) from the trailing arm.
5. Remove the brake hose bracket mounting bolts (A) from the knuckle.
6. Remove the caliper mounting bolts (B), and hang the caliper assembly (C) to one side. To prevent damage to the caliper assembly or brake hose,
use a short piece of wire to hang the caliper from the undercarriage.
7. Remove the wheel sensor (A) and sensor harness from the knuckle (B). Do not disconnect the wheel sensor connector.
8. Raise the stake (A) of the spindle nut (B), then remove the nut.
