MDX V6-3471cc 3.5L (2002)
2. Install the new bearing (A) on the transfer output shaft (B) with the special tools and a press.
3. Select the 24 mm thrust shim.
24 mm Thrust Shim Selection
NOTE: If the transfer output shaft, transmission housing, or torque converter housing is replaced, select the 24 mm thrust shim.
1. Install the transfer output shaft in the torque converter housing.
2. Measure the distance (A) between the torque converter housing surface (B) and the 24 mm thrust shim mounting surface (C) of the transfer output
shaft, then note the measurement (Measurement A).
3. Measure the distance (A) between the transmission housing surface (B) and the bearing inner race (C), then note the measurement (Measurement
B). Do not push the bearing inner race while measuring the distance.
4. Calculate the thickness of the 24 mm thrust shim using the formula below.
FORMULA:
24 mm Thrust Shim Thickness
