NSX-T V6-3.0L DOHC (VTEC) (1998)
Journal Out-of-Round:
Standard (New): 0.004 mm (0.0002 inch) max.
Service Limit: 0.006 mm (0.0002 inch)
-
Measure taper at edges of each rod and main journal.
-
The difference between measurements on each journal must not be more than the service limit.
Journal Taper:
Standard (New): 0.005 mm (0.0002 inch) max
Service Limit: 0.010 mm (0.0004 inch)