NSX-T V6-3.0L DOHC (VTEC) (1998)
/Page-897004.png)
NOTE: The seal surface on the block should be dry. Apply a light coat of oil to the crankshaft and to the lip of seal.
NOTE:
-
Use liquid gasket, Part No. 08718 - 0001 or 08718 - 0003.
-
Check that the mating surfaces are clean and dry before applying liquid gasket.
-
Apply liquid gasket evenly, being careful to cover all of the mating surface.
-
To prevent leakage of oil, apply liquid gasket to the inner threads of the bolt holes.
