NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-4282002.png)
4. Intermediate and Top Paint Coats (Body color and black paint)
NOTE:
-
The paints are the dual liquid type based on the color chart.
-
Measure the pigment and hardener as described so they are in correct ratio.
-
Use the acrylic urethane paint prepared according to the mixing chart as the intermediate coat.
Mixing Ratio:
Mix 5 parts of body color pigment to 1 part of additive.
Mix 4 parts of the mixture of the pigment and additive
with 1 part of the hardener.
NOTE:
-
Dilute the mixture with 40-50% of the specified thinner (Highart Thinner).
-
Be sure to mix the correct amount of the additive.
-
Use a spray gun to apply the paint. Do not use a brush.
WARNING:
-
Ventilate when spraying paint. Most paint contains substances that are harmful if inhaled or swallowed. Read the paint label before
opening the paint container.
-
Avoid contact with skin. Wear an approved respirator, gloves, eye protection and appropriate clothing when painting.
-
Paint is flammable. Store it in a safe place, and keep it away from sparks, flames or cigarettes.
Drying time:
NOTE: The HIGH ART MAT BLACK SURFACER is a dual liquid type. If mixed, it will harden in a matter of hours.
