NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-4369004.png)
-
Check the welding sections for cracks
7. Finish the welding area.
-
Roughly grind the welds with a disc grinder. Be sure to leave the finishing allowance this time.
-
Finish grind the finishing allowance with a disc sander until it is smooth.
WARNING: To prevent eye injury, wear goggles or safety glasses whenever sanding, cutting or griding.
-
Smooth the trunk lid opening using a hammer and dolly.
-
Take care not to grind the aluminum alloy base while roughly grinding the welds.
-
Take care not to grind excessively.
-
Do not press on the sanding tools excessively. If the disc face is clogged with the aluminum alloy particles, replace with a new disc.
8. Apply the sealer.
9. Apply the paint.
See Paint Repair section.
