NSX-T V6-3.2L DOHC (VTEC) (1997)
Camshaft: Specifications
DIMENSIONS
Camshaft-to-Holder Oil Clearance:
Standard (New) ............................................................................................................................................... 0.050 - 0.089 mm (0.002 - 0.004 inch)
Service Limit ............................................................................................................................................................................. 0.15 mm (0.006 inch)
Camshaft Total Runout:
Standard (New) ............................................................................................................................................................... 0.03 mm (0.0012 inch) max.
Service Limit ........................................................................................................................................................................... 0.04 mm (0.0016 inch)
Cam Lobe Height Standard (New):
Intake
Primary .......................................................................................................................................................................... 37.086 mm (1.4601 inch)
Mid ............................................................................................................................................................................ 38.037 mm (1.4975 inch)
Secondary ................................................................................................................................................................. 38.037 mm (1.4975 inch)
Exhaust
Primary .......................................................................................................................................................................... 36.559 mm (1.4393 inch)
Mid ................................................................................................................................................................................ 37.398 mm (1.4724 inch)
Secondary ...................................................................................................................................................................... 36.741 mm (1.4465 inch)
End Play:
Standard (New) ................................................................................................................................................... 0.05 - 0.15 mm (0.002 - 0.006 inch)
Service Limit ............................................................................................................................................................................... 0.05 mm (0.02 inch)
TIGHTENING SPECIFICATIONS
Camshaft Holders And Holder Plate Bolts [1]:
Bolts 1 through 24 (8 mm x 1.25 mm bolts) ................................................................................................................................... 22 Nm (16 ft. lbs.)
Bolts 25 through 28 (6 mm x 1.0 mm bolts) ................................................................................................................................. 9.8 Nm (87 in. lbs.)
[1] Refer to Service and Repair for bolt identification and tightening sequence.