NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-959001.png)
Camshaft: Testing and Inspection
NOTE:
-
Do not rotate the camshaft during inspection.
-
Remove the rocker arms and rocker shafts.
CAMSHAFT HOLDER BOLTS TORQUE SEQUENCE
1. Put the camshafts, the camshaft holders and holder plates on the cylinder head, and then tighten the bolts to the specified torque.
NOTE: Apply clean engine oil to 8 mm bolt threads.
-
Specified torque:
-
Bolts 1 through 24: 8 mm x 1.25 mm bolts to 22 Nm (16 ft. lbs.).
-
Bolts 25 through 28: 6 mm x 1.0 mm bolts to 9.8 Nm (87 in. lbs.).
2. Seat the camshaft by pushing it toward the left end of cylinder head.
