NSX-T V6-3.2L DOHC (VTEC) (1997)
/Page-466001.png)
Parking Brake Warning Switch: Testing and Inspection
1. Remove the center console, and disconnect the connector from the switch.
Parking Brake Switch Test
2. Check continuity between the positive terminal and body ground with the brake lever up and down.
-
There should be no continuity with the brake lever down.
-
There should be continuity with the brake lever up.
NOTE: (Canada) If the parking brake switch is OK, but the brake warning system does not work, make the input test for the daytime running
lights control unit.
